• Home
  • S.BUS High Voltage System

S.BUS High Voltage System

S3172SV

Speed : 0.23sec/60°(7.4V)
Torque : 4.1kgf·cm(7.4V)

Speed : 0.26sec/60°(6.6V)
Torque : 3.7kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS173SV

Speed : 0.10sec/60°(7.4V)
Torque : 7.6kgf·cm(7.4V)

Speed : 0.11sec/60°(6.6V)
Torque : 6.8kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS173SVi

Speed : 0.10sec/60°(7.4V)
Torque : 7.6kgf·cm(7.4V)

Speed : 0.11sec/60°(6.6V)
Torque : 6.8kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

S9170SV

Speed : 0.12sec/60°(7.4V)
Torque : 6.8kgf·cm(7.4V)

Speed : 0.13sec/60°(6.6V)
Torque : 6.0kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS171SV

Speed : 0.10sec/60°(7.4V)
Torque : 11.8kgf·cm(7.4V)

Speed : 0.11sec/60°(6.6V)
Torque : 10.6kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS172SV

Speed : 0.11sec/60°(7.4V)
Torque : 37.0kgf·cm(7.4V)

Speed : 0.12sec/60°(6.6V)
Torque : 34.0kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS174SV

Speed : 0.09sec/60°(7.4V)
Torque : 9.6kgf·cm(7.4V)

Speed : 0.10sec/60°(6.6V)
Torque : 8.8kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS175SV

Speed : 0.12sec/60°(7.4V)
Torque : 21.0kgf·cm(7.4V)

Speed : 0.13sec/60°(6.6V)
Torque : 19.4kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS272SV

Speed : 0.08sec/60°(7.4V)
Torque : 12.0kkgf·cm(7.4V)

Speed : 0.09sec/60°(6.6V)
Torque : 11.2kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

BLS177SV

Speed : 0.11sec/60°(7.4V)
Torque : 37.0kgf·cm(7.4V)

Speed : 0.12sec/60°(6.6V)
Torque : 34.0kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

S3070HV

Speed : 0.15sec/60°(7.4V)
Torque : 6.5kgf·cm(7.4V)

Speed : 0.17sec/60°(6.6V)
Torque : 5.8kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

S3071HV

Speed : 0.17sec/60°(7.4V)
Torque : 10.5kgf·cm(7.4V)

Speed : 0.19sec/60°(6.6V)
Torque : 10.0kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

S3072HV

Speed : 0.15sec/60°(7.4V)
Torque : 6.5kgf·cm(7.4V)

Speed : 0.17sec/60°(6.6V)
Torque : 5.8kgf·cm(6.6V)
Can be used with T18MZ / T14SG servo program function

  • New "SV" and "SVI" servos are compatible with S.BUS 2 system allow you connect S.BUS 2 port in line with telementry sensors.

  • New "SV" series servos are designed for High Voltage use, we recommend to use LiFe or LiPo battery.

  • New "SV" series servos and S.BUS servos can program to use servo program function in T18MZ / T14SG. The connection port is located back side of the radio.

  • New "SV" series servos come presets with soft start in order to protect the linkage. Also you can change this to use servo program function.

Connection example.1 In case you connect S.BUS servo to S.BUS receiver.

You can connect S.BUS servo to use 3way S.BUS hub. S.BUS servo is not written their channel at first, as to write their channel, use SBC-1 or “PC Link” software.

Connection example.1

Connecion example.2 In case you use PWM(None S.BUS system included) servo for S.BUS receiver.

If you use PWM servo for S.BUS receiver, use SBD-1(S.BUS decoder). PWM servo do not have their channel, as use SBC-1 to tune SBD-1.

Connection example.2

S.BUS Accessories

Hub w/Cable

100mm - 1500mm

Terminal Box

4-Way Terminal Box

S.BUS Decoder(SBD-1)

400 / 600 / 1100mm

USB adapter(CIU-2)

USB Interface